2000 Ford Windstar 3.8L (bearing shot.. somewhere among 7 pulleys)?

How much play might a power steering pump pulley have?



I changed the belt and idler pulley(no change). The sound I hearing can get too loud at times to isolate the bad bearing. Serpentine drives: Crank, water pump, alternator, power steering, idler, and tensioning idler. Any ideas?2000 Ford Windstar 3.8L (bearing shot.. somewhere among 7 pulleys)?i would get a can of wd40 and spray each one and listen for the noise to stop2000 Ford Windstar 3.8L (bearing shot.. somewhere among 7 pulleys)?take the belt off and check each pulley for play and spin the p/s a/c idler and tensioner. you should be able to tell which one is the problem. most likeky the idler or tensioner2000 Ford Windstar 3.8L (bearing shot.. somewhere among 7 pulleys)?I have seen the cam synchronizer go bad and thought it was a pulley problem. it sounded like the noise was right there at the belt. this was also a 2000 windstar w/3.8. good luck.